Purchased for my wife's 2008 Honda Odyssey, but the front brake pads are not the right size.At least the front rotors slipped right on with a perfect fit.However, the engagement tabs on the new front pads measured 0.89"-0.90" tall. Unfortunately, they need to fit into a slot that is 0.83" tall. Not a big deal, as the extra height is easily removed with a grinding wheel (if you have a grinding wheel and a set of calipers).After spending 45 minutes machining the tabs on all four front pads, I went to install them and they fit beautifully, at least height-wise. But that was when I noticed that it wasn't seated quite straight horizontally in the caliper.Pulled it back out and measure again, only to discover that the length of the new front pad was only 5.82" or so, but the old pads were 6.10". That 0.28" length difference is significant when brakes have such close tolerances and clearances.I'm not even going to try the rears if the fronts are so far off. I don't want the pads falling out when my wife steps on the brakes.